Large-object precision measurement
FMCW absolute ranging for target coordinates in large assemblies, thermal drift of machine tools and dynamic displacement of structures
Typical scenarios
These are example scenarios. Contact us to assess your own working conditions.
Large assemblies
Target 3D coordinates in aircraft fuselage section joining, rail vehicle bodies and ship block assembly
Heavy equipment
Target 3D coordinates on heavy equipment such as tunnel boring machine parts
Machine tools and large gantries
Thermal drift and position monitoring
Dynamic displacement
Short-term absolute displacement and velocity in bridge load tests, port cranes and large gantries
Measurement tasks on large objects
Precision measurement of large parts, equipment and structures falls into three common tasks:
- Target 3D coordinates: aircraft fuselage section joining, rail vehicle bodies, ship block assembly and heavy equipment such as tunnel boring machine parts need the 3D coordinates of targets during assembly.
- Thermal drift and position: machine tools and large gantries need thermal drift and position monitored at the 10 µm level at 10 m.
- Dynamic displacement: bridge load tests, port cranes and large gantries need absolute displacement and velocity measured over short periods.
Today these tasks mostly use laser trackers with spherically mounted reflectors, total stations or interferometers.
Applications
Single-point absolute ranging (LUC-POINT™): built on FMCW coherent measurement. On cooperative targets it gives ±0.1 mm at 100 m and ±0.01 mm at 10 m. It measures at 5 kHz, and distance and radial velocity are both measured directly. Use it to monitor thermal drift of machine tools and large gantries, and to measure dynamic displacement and velocity in bridge load tests and on port cranes.
Panoramic coordinate measurement (LUC-SPHERE™): LUC-POINT™ on a pan-tilt unit, with a 360° × 270° scanning field of view and a 0.2–100 m measurement range. On cooperative targets, range accuracy is 50 µm at 20 m and 20 µm at 10 m. Use it to measure target 3D coordinates in large assemblies.
For full specifications, see the LUC-POINT™ and LUC-SPHERE™ product pages.
Validation status
- Accuracy: the figures above come from the product datasheets and were measured on cooperative targets (reflectors). A third-party certificate covers the ranging repeatability of LUC-POINT™ within 100 m under laboratory conditions.
- Natural surfaces: LUC-SPHERE™ measurement of natural surfaces without targets is verified in demonstrations and is in formal testing. We give no accuracy figure for this condition yet.
- Measured cases: no public measured case yet. For your specific conditions, ask for an on-site evaluation.
Discuss your application
Talk to our engineers about how to integrate our photonic sensors into your application.